If you’ve ever had to install a new bathroom sink drain, then you know how frustrating it can be. After hours of trying, your sink is still clogged and the pipes are flooding all over the floor! Don’t worry though, because these tips will make the installation process much easier. You can browse here https://www.plumberessexcountynj.com/sinks-and-drains to see more.
Use a Plumbing Snake
A plumbing snake can be a real lifesaver if you need to unclog your sink drain. It looks like a thin metal snake, but it has a copper wire loop on the end of it. This metal loop can bend down into pipes and loosen the clogs that are causing your problem.
Splice the Pipe
Many clogged bathroom sink drains have a blockage in them because of roots growing into the pipes. Splicing is one way to avoid this problem.
Instead of cutting the pipe completely, you can simply use a new piece of pipe along with the old one. The splice transition is much easier than a complete cut and repipe.
Use a Flexible Drain Line
If you want to avoid having to replace your entire bathroom sink drain, you should consider using flexible drain lines in it. This type of drain has interconnecting pipes and can utilize 90 degree angles that are only available in rigid lines.
Unlike the flexible drain line, the rigid line has a straight pipe from one end to another.
Change Your Water Pressure
A slow draining toilet is not always a good thing. If you have a poor water pressure, you may have a clogged bathroom sink drain. You can change your water pressure easily by installing an adjustable shower head shower-head in your bathroom sink drain.
Replace your Drain Trap
A clogged bathroom drain may be because of a faulty drain trap. The trap is a rubber or plastic bowl that goes under or above your sink. You can easily tell if it’s faulty when water starts to rise in the bowl. Unfortunately, it won’t be easy for you to fix this on your own.
Get Rid of Your Clog
If none of these tips work out, then you should consider getting rid of the clog yourself! It’s not very hard, but it can be messy. You’ll need a screwdriver, pliers, and a wrench. Turn off the water supply to your bathroom sink before you start.